BDI Equipment — Telehandler BDTH-45

Telehandler short for a telescopic handler is a versatile hydraulic lifting unit that is often used in the construction, farming and agriculture sectors. Modern telehandlers are maneuverable hybrid units that offer the load-lifting capabilities of a forklift with the lifting range of a crane.

Telehandler BDTH-45

Units are equipped with a telescopic boom that can be fitted with a wide range of attachments to allow the unit to perform a wide variety of functions. A simple quick hitch design allows operators to quickly and safely change attachments depending on the task required to be completed.

Telehandler BDTH-45

Power Transmission System

1. Engine

Diesel engine equipped with T4F / Stage V emissions, with high reliability and fuel economy, low noise, and low emissions, is specially designed and manufactured for construction machinery operating conditions.

The power system adopts two-way vibration reduction technology, and all-around elastic suspension, effectively overcoming the resonance between the power system and the frame, reducing the noise and the fatigue damage of the power system.

2. Gearbox

The gearbox has superior performance and powerful function, meeting the use requirements of various working conditions; for the front 2 and the rear 2 gears, the expansion arm fork installation can effectively improve the economy and the service life of the engine; the electronic control shift is easy and simple, effectively reducing the operational strength of the driver.

3. Driving axle

Maintenance-free multiple sheets wet brake bridge with spring brake and hydraulic release. The wet bridge structure is simple and compact, the internal system is not polluted by the outside world, the brake pad infiltration in the hydraulic oil and heat dissipation is good, and the wet brake can achieve maintenance-free because of the full closure.

Telehandler BDTH-45

This blog has demonstrated how a versatile telehandler can become an important piece of machinery across construction, mining, farming and agriculture sites.

To discuss how your next project can benefit from the use of a telehandler contact sales10@bdiwearparts.com or fill out a contact form and we will get back to you as soon as possible.

 

BDI Wear Parts-- Cutting Edge--Loader Bucket Cutting Edges

 BDI Wear Parts-- Cutting Edge--Loader Bucket Cutting Edges

Loaders are the most varied product we offer. Each equipment manufacturer has its own system and spacing, with spacing varying for different-sized models across a given manufacturer's offering. This means edges are unique for almost each and every manufacturer and model.

Wide range of bolt-on and weld-on cutting edges available for all makes and models of wheel loaders.

l Single bevel weld-on cutting edges available in flat and half arrow styles.

l Double bevel bolt-on edges available in multiple widths and thicknesses to suit your needs.

l Bolt on half arrow edges available for extreme abrasion applications.

l Bolt on and weld on cutting-edge segments available to place between bucket teeth.

l Bolt on and weld on heel plates available in several thicknesses to protect the bottom of your loader buckets.

Go and get the perfect Cutting Edge--Loader Bucket Cutting Edges right now!

 

E-mail: sales10@bdiwearparts.com

 BDI Excavator Attachments -- Hydraulic Hammers

BDI hydraulic hammers offer vibration control, simplified lubrication, and full serviceability and can be mounted on a variety of different machines.

Hammers aren't meant to have an easy life and occasionally need to be rebuilt. A typical hammer body can cost as much as 70% of the cost of a new hammer, and a BDI hammer body can be re-sleeved for approximately 1/3 of the cost of competing brands when the body becomes worn or damaged.

The Anti-Blank Firing (ABF) system prevents hammers from firing if the chisel isn't loaded, minimizing wear and increasing hammer life. The round, rotating tool retaining pin also contributes to longer hammer life and is an easy tool replacement. Replaceable cylinder sleeves prevent wear to the main body, allowing for an easy, economical rebuild, and a grease port is provided for automatic or manual greasing, which prevents damage or premature wear caused by a lack of grease.

Hydraulic Hammers Applications 

1. Mine mining: mountain opening, mining, grid sieve crushing, secondary crushing

2. Metallurgy: ladle, slag cleaning, furnace body dismantling, equipment foundation dismantling

3. Railway: mountain opening, tunnel excavation, road and bridge demolition, roadbed compaction

4. Highway: expressway repair, cement pavement crushing, foundation excavation

5. Municipal gardens: concrete crushing, water, electricity and gas engineering construction, old city renovation

6. Construction: Demolition of old buildings, broken reinforced concrete

7. Ships: Hull removal and derusting

8. Others: breaking ice, breaking frozen soil, vibrating sand moulds

Go and get the perfect Excavator Attachments-- Hydraulic Hammer right now!

 

E-mail: sales10@bdiwearparts.com

BDI Equipment--Material Handling / Electric Pallet Jack BDT-1

-------------QUICK OVERVIEW--------------

Features:

The same carrying size as traditional hand pallet trucks
Light-weight (only 125kgs=275lbs)
Highly efficient drive motor to provide high work performance (3 times higher than manual pallet trucks)
Long lifetime (3 times longer than manual pallet trucks)
Equipped with recharge alert, error code display
6s replace battery and 60s replace drive wheel
Traveling speed up to 4 km/h (laden), 5km/h (unladen)
Gradeability from 6% (2T=4400 lbs) to 20% (unladen)
Easy repair and maintenance

------------- SPECIFICATION --------------

Capacity: 1500 KG
Load Center: 600mm
Overall fork width:520/550/685 mm
Fork Length:1150/1220 mm
Overall Length:1552/1622 mm
Lowered height of fork: 82±2 mm
Max height of fork: 197 mm
Overall height (with tiller):1276mm
Rear body width: 520/550/685 mm
Minimum Turning Radius: 1353/1426 mm

Performance

Max Traveling speed: 4 km/h (laden)// 5 km/h (unladen)
Gradeability: 6 % (laden)// 20 % (unladen)
Traveling: DC 0.75 Brushless
Lifting: DC 0 8

Battery

Voltage: 48
Capacity/type: 10/15 Ah Lithium

Break Type

Travel Break: Regenerate
Brake: Electromagnetic

Controller

Controller: BDT-1

If you are interested in this product, please contact us.

Linda

Email: sales10@bdiwearparts.com

+1 647-898-7506 (Mobile)

https://www.bdiequipments.com/material-handling/electric-pallet-jack-bdt-1.html

 New Update of BDI Equipment-- Tractor Loader

The Tractor Loader is a front-mounted utility attachment that is capable of using both skid steer (boom) and wheel configuration. The capacity is over 6 cubic meters, which makes it the most powerful loader in its class.

A loader is a type of tractor attachment that can scoop up loose material such as dirt and sand with its wide bucket, then carry or push the load to another destination where it will be dumped or spread on the ground.

This powerful and large equipment is ideal for construction jobs. It works in tandem with a tractor or loader to move a bucket full of items across the ground or quickly scoop up loose materials from the ground to transport them elsewhere.

A tractor loader is the most common type of loader. It consists of two booms (arms) and a bucket at the end, which can reach out over 12 feet and scoop up loose materials such as sand, dirt or gravel. A second boom extends horizontally to help stabilize the unit on hillsides while it loads material into trucks.

The loader is a very useful piece of equipment that makes moving around and scooping up loose materials very easy. The bucket can be adjusted to fit any sized load, and it keeps the material being transported close to the ground where it's needed.

Get in touch and see how we can assist you with your cost per meter and increasing your productivity.

E-mail: sales10@bdiwearparts.com

https://www.bdiequipments.com/tractor-loader/

BDI Equipment--Recommend New BDI Skid Steer Loader

 BDI Equipment--Skid Steer Loader 

The skid steer loader is a type of track-drive equipment that can move forward, and backward and rotate 360 degrees. It's also referred to as a mini-excavator or mini excavator. It's known for its maneuverability and small size, which make it easy to transport into tight spaces when fully assembled. The skid steer loader offers an excellent balance of agility and strength, especially compared with larger bucket heavy equipment).

The skid loader with the versatility to do it all.

A skid steer loader is a machine that combines the material handling capabilities of a hydraulic excavator or wheel loader with the versatility of a backhoe. Skid-steer loaders are typically four-wheeled or tracked vehicles with the front and back wheels on each side mechanically linked together to turn at the same speed, and where the left-side drive wheels can be driven independently of the right-side drive wheels. This is accomplished by having two separate and independent transmissions; one for the left-side wheels and one for the right-side wheels.

BDI Skid steers are capable of digging, pushing, hauling and lifting， skid steer loaders are available in both diesel and gas-powered models. These machines are typically four-wheeled or tracked vehicles with the front and back wheels on each side mechanically linked together to turn at the same speed, and where the left-side drive wheels can be driven independently of the right-side drive wheels.

BDI has all you need for a skid steer loader. We make sure you find the correct items. Canada's local inventory or technical expertise makes maintenance easy and fast.

 

Reach out to us for more details!

E-mail: sales10@bdiwearparts.com

https://www.bdiequipments.com/traditional-skid-steer-loader/

 BDI Equipment---Mini Dumper Wheelbarrow

This mini wheelbarrow is just as sturdy, with a load capacity of 430 pounds, as our full-size Dumpers, but it's smaller and lighter. The wheels make this model easy to maneuver and even easier to store. You won't have any problem moving small loads around your yard or garden with the Mini Dumper Wheelbarrow from Dump Master!

Start building your garden path with the Mini Dumper Wheelbarrow. This wheelbarrow features a high-quality, sturdy steel frame and comes with a strong polypropylene bin, making it durable and easy to use.

-------------QUICK OVERVIEW--------------

Model: BMD-3

Weight kg(lb): 400 (882)

Engine: Honda GX 390 13.5hp gasoline engine

Dimension: 205*115*135cm

Loading capacity: 600kg(1323lb)

Speed: 0-3.5km/h

Transmission: hydraulic transmission system

Driven: Crawler

Drum material: Plastic-spray

Features:

Can carry maximum 600kgs/1323lb

Good for carrying bricks, sand, stones, wood, crops and fruits

Multifunctional design, self-loading and unloading dumper

Hydraulic transmission system to easily operate

High-top design to arrive at normal truck height

Equipped with the powerful Honda GX 390 13.5hp gasoline engine

Crawler design can be suitable for outdoor sites Ex. Uneven, rocky, muddy environment

Compatible with a wide range of attachments, parts and accessories

Easy maintenance

The Min Dumper is the perfect solution for transporting or moving items short distances. This unit features a built-in handle for easy lifting and dumping, and rugged wheels with pneumatic tires make it easy to maneuver over rough surfaces. The Mini Dumper accepts standard 48-qt. garbage cans or buckets, making it an ideal choice for small jobs where waste disposal is not needed.

Please do not hesitate to contact us if you have any questions about our equipment.

Toll free: 1-800-861-1986

Email: sales10@bdiwearparts.com

https://www.bdiequipments.com/material-handling/mini-dumper.html

 BDI Wear Parts-- Ground Engagement Tools

BDI has a complete assortment of Ground Engagement Tools that are fit for applications including digging, excavating, trenching and breaking. Our tools include teeth, bucket protection, rippers, cutting edges and chisels for breakers. All Ground Engagement Tools are produced following the strictest demands in the industry. By following these demands we can guarantee the best quality.

Our selection of Ground Engagement Tools is designed to help you get the job done.

All products are produced following the strictest demands in the industry. By following these demands we can guarantee the best quality. We offer a complete assortment of Ground Engagement Tools for both contractors and construction companies worldwide.

BDI’s Ground Engagement Tools assortment consists of: 

Teeth, Bucket protection, Cutting edges, Rippers, Chisels for breakers. 

BDI Ground Engagement Tools are fit for machines of:

Caterpillar®, Komatsu®, Hitachi@, Hyundai@, Case@, JohnDeere@, Volvo@, Kobelco@, and all other common brands.

Go and get the perfect construction equipment spare and wear parts right now!

sales10@bdiwearparts.com 

https://www.bdiwearparts.com/part-list